Step 1: Ordering
Before ordering deck tiles, let’s get an estimate of how many you’ll need. Measure your surface, calculate the number of square feet the area in total and find out how many deck tiles you’ll order. Of course, ordering a few extra is always a good idea, as you may need to cut tiles to fit around oddly shaped areas.
Fortunately, having a surplus on hand allows you to replace tiles if they become damaged. In fact, a good rule of thumb is to order 10 percent more tiles than your measurements say you need. Additionally, consider whether you want a border for your deck. If so, include it in your coverage calculations.
Step 2: Checking calculations
Once your deck tile has arrived, lay down a row to ensure your measurements are correct. Place one tile on the space you’re covering, then interlock the next until you’ve spanned the width of your surface. If you notice you have a gap around the edges, be prepared to cut some of your tiles if you want complete coverage.
Step 3: Installing deck tiles
With all your measurements confirmed, you can start installing your deck. Pick a corner in which to lay your first tile. You may have to shift the tiles around to find which edges insert into others – each tile has rings and pins that you put together to interlock the tiles. You’ll find these pieces on the edges of each tile, coming out of the plastic base.
Step 4: Custom cutting
If you run into an area that has an odd shape, it’s time to cut tiles to fit around it. Fill in your tiles as close as possible, then cut cardboard into 1-square-foot pieces to act as template for your tiles. Draw on your cardboard where you’ll have to cut the tiles to fit into the space. You can even cut the cardboard square and lay it in place to make sure the template is the right shape. Next, mark your actual tiles.
Before you cut according to the lines you copied onto your tiles, you need to make sure there aren’t any screws on your cut line. If there are, you may need to move some screws to a different fastening point. See how many screws attach each slat to the base, and ensure the same amount is in place after you cut.
Use a jigsaw and all the necessary safety equipment to cut along your marks. Make sure you leave the tile’s correct edges intact so you can interlock your cut pieces to the ones already in place. Use a palm sander or a Dremel tool to sand along the edge of your cut to create a smooth, beveled finish. Put the cut tiles in place and you’re done.
Step 5: Preserving deck tiles
Acacia tiles, which are permanently used outdoors, are exposed to strong weather and sunlight and therefore require special care. In order to keep your tiles beautiful for a long time, we recommend treating the wood tile once or twice a year with wood preservation (oil or wood preservative).
